|
»
Go back and choose a different type of Server
»
Finished installing? Check your SSL Certificate installation with HelpNow!
»
SSL Certificate Purchasing Information for F5 Big-IP
»
CSR generation instructions for F5 Big-IP
|
Install your Trustwave SSL certificate |
|
When your certificate is issued, you will receive a ZIP file via e-mail which contains
four files. You will need two files from that ZIP file, the file ending in .cer, and the
file called xroot.crt. The .cer file contains your actual certificate while the xroot.crt
contains the Trustwave intermediate certificates that are required for our certificates to
function properly.
You will need to move both files to the Big-IP. We recommend using FTP since it is generally
the easiest method. Save your .cer file that you received via e-mail in the
/config/bigconfig/ssl.crt/ folder as www.yourdomain.com.crt.
The Big-IP requires certificates to end in .crt in order to function properly.
|
|
|
Install the intermediate certificates |
Take the xroot.crt file from the ZIP file and move it onto the Big-IP. Again, we recommend
using FTP. Save it in the /config/bigconfig/ssl.crt/ folder as
intermediate-ca.crt.
|
|
|
Completing the installation |
|
To install the new certificates, simply disable and enable the proxy:
# bigpipe proxy xxx.xxx.xxx.xxx:443 disable
# bigpipe proxy xxx.xxx.xxx.xxx:443 enable
|
»
Check your SSL Certificate Installation with HelpNow!
|
U.S. or 
Canada)
