Installing a Trustwave SSL Certificate on SonicWall SSL Offloaders

SSL Certificate installation for SonicWall SSL Offloaders

» Go back and choose a different type of Server

» Finished installing? Check your SSL Certificate installation with HelpNow!

» SSL Certificate Purchasing Information for SonicWall SSL Offloaders

» CSR generation instructions for SonicWall SSL Offloaders

Upload your Trustwave SSL Certficate to the SonicWall SSL Offloader Upload your Trustwave SSL Certficate to the SonicWall SSL Offloader
When your certificate is issued, look for the .cer file in the ZIP file that you receive. That file contains your certificate in PEM format. Upload the .cer file to the SonicWall to continue.
Downloading the Trustwave intermediates Downloading the Trustwave intermediates
To load the Trustwave intermediate files, you will need the GlobalSign Root, the GlobalSign Partners intermediate, and the Trustwave intermediate. The SonicWall SSL Offloader will accept PEM encoded CA certificates, and you can download them below:

Download the GlobalSign Root certificate

Download the GlobalSign Partners intermediate certificate

Download the Trustwave intermediate certificate

Copy all three certificates onto your SonicWall machine to continue.

Loading the GlobalSign Root certificate Loading the GlobalSign Root certificate
To make the SonicWall use the intermediate certificates, you must create a certificate group which contains the intermediates. Each intermediate certificate must be loaded individually and then grouped at the end:

Use these commands to load the GlobalSign Root certificate in PEM format (GSRoot.crt)

# ssl
# cert GSRoot create
# pem GSRoot.crt <- GlobalSign root cert filename

Loading the GlobalSign Partners intermediate certificate Loading the GlobalSign Partners intermediate certificate
Use these commands to load the GlobalSign Partners certificate in PEM format (GSInt.crt)

# ssl
# cert GSInt create
# pem GSint.crt <- GlobalSign Partners cert filename

Loading the Trustwave intermediate certificate Loading the Trustwave intermediate certificate
Use these commands to load the Trustwave intermediate certificate in PEM format (TrustwaveCA.crt)

# ssl
# cert TrustwaveCA create
# pem TrustwaveCA.crt <- Trustwave intermediate cert filename

Create a certificate group and add certificates Create a certificate group and add certificates
Now that you have loaded the intermediate certificates into the SonicWall, you can create a certificate group. After you create it, you can add in the three certificates which you just loaded:

# certgroup CACertGroup create
# cert TrustwaveCA
# cert GSInt
# cert GSRoot
# end

All of your certificates are now loaded, but you will need to create a logical server before you continue.

Create a logical server policy Create a logical server policy
Please bear in mind - this is only an example. If you are unsure about what data belongs in these lines, please contact your network administrator.

# server server1 create
# ip address 10.1.2.4
# localport 443
# remoteport 81
# secpolicy myPol
# certgroup chain CACertGroup
# cert new_cert
# exit

Your certificates are now installed.

» Check your SSL Certificate Installation with HelpNow!

Trustwave Technical Support Options
Toll-Free: 866-775-2378
Direct: +1-608-294-6940
E-Mail: sslsupport@trustwave.com
SSL Certificate Customers - Instant Support!
We invite our SSL Certificate Customers to use our new instant online troubleshooter, HelpNow, to diagnose SSL Certificate issues instantly.
Get HelpNow! »
Trustwave Support Tips:
If you are contacting us about your SSL certificate via e-mail, please provide us with your website's address and a detailed description of the issue. Screenshots may also help us resolve your problem quickly, so you are welcome to include those as well.
Trusted by Internet Explorer, Firefox, Netscape, Opera, AOL, Safari, Mozilla
Home Legal Information Privacy Policy Contact Us International
© Trustwave
Ph: 888-878-7817 (312-873-7500 outside U.S. or Canada) Fax: 312-443-8028 info@trustwave.com